CONCRETE WALL SAWING

Track sawing for horizontal and vertical surfaces.

Wall saws are typically used on vertical surfaces when a new doorway, window or HVAC openings are needed. Wall sawing employs a diamond blade on a track-mounted system that can be used for vertical or horizontal cuts. Wall sawing allows for precise cuts in both concrete and masonry structures. These saws run on hydraulic or electric power and are also commonly referred to as concrete track saws. We have several hydraulic saws that have the power to saw effectively. Recent developments in high cycle technology have created alternatives to hydraulic equipment. The high cycle equipment allows this wall sawing contractor to get to locations further from the truck than hydraulics allow. They are also lighter in weight to allow them to be transported easier.

Wall sawing can be performed up to 30" deep. Cutting can also be performed from both sides of the wall, giving a total depth of up to 60". If your opening requires a specific angle through the concrete, this saw can accommodate. If you have thicker walls and floors, a wire saw can be utilized to achieve the cutting necessary.

Typical Applications Include:

• Straight, smooth finished openings in walls, ceilings, and floors

• Accurately sized, fixture ready openings

• Bevel cutting for a chamfered edge

• Flush cutting against other wall surfaces

• Foundations, Dams, levies, precast walls

• Diameter	Segment size	Segment Number
  800mm	40x4.6x12	46
  900mm	40x4.6x12	50
  1000mm	40x4.6x12	56
  1200mm	40x4.6x12	70

Produce Process